5 Best Of How To Install A Corrugated Metal Roof On A Shed Best Wallpaper JPG. You might have to stagger the metal and cut one or both outside edges to get the correct overall width. Then trim all edges of the roof with metal trim made for that purpose.
Provides the easiest most cost-effective way to install solar panels directly to standing seam metal roofs. First I put down 30 pound roofing felt using staples and covered the edges with drip edging using roofing nails drip edging prevents rain from coming into contact with the wood of the roof shown here in this photo with the ridge cap and the first corrugated sheet already in place. Take care the first piece is aligned precisely perpendicular square to the edge.
Be sure the larger edge is laid so that the small edge of the next panel will overlap it.
Align the first metal roofing panel so that it overlaps the edging by 12 to 34 of an inch and is square to the roof line. Align the first metal roofing panel so that it overlaps the edging by 12 to 34 of an inch and is square to the roof line. Build the roof as normal with the trim felt paper and metal flashing. Be sure the larger edge is laid so that the small edge of the next panel will overlap it.